Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Categories
- 955 All Categories
- 3 Picture Posting and Resizing
- 56 New Member Introductions
- 115 Off-Topic Forum
- 4 Photography
- 2 Resources
- 16 New Product Information
- 167 The SierraWest Forum
- 9 Brett's Blog
- 119 General News & Ramblings
- 3 Re-Release Information
- 6 Q & A about SierraWest
- 9 What Would You Like to See?
- 384 Builds
- 140 HO Scale Builds
- 165 O Scale Builds
- 60 Finished SW Build Pics
- 14 Miscellaneous Builds
- 190 Techniques
- 19 Working with Wood
- 20 Painting Castings
- 5 Masonry
- 23 Scenery
- 37 Tools and Supplies
- 21 Layout Planning & Building
- 40 Miscellaneous
- 24 Prototype Information
- 22 Reference and Research
Sawdust burner for Sierra West Sawmill
This is not an Sierra West kit.. but.. it goes with the sawmill on my other post.
The Sawdust burner is an old Icon for the sawmills in the time period of the sawmills modeled. The actual sawmill at Sebastopol has one, but no longer in use.
Inside of the burner of the mill
Satellite of the Mill 5/24
To get the sawdust from the mill to the burner takes some inventive ways. The "powerful" blower installed under the floor at the mill, combined with the big blower on the burner will move the sawdust thru the aluminum pipe very well.
For this model, the pipe is removable to be able to remove the roof of the sawmill.
As you can see the burner is scratchbuilt from brass rod, sheet, and screen. The blower is built with Plastistruct. It is lit inside so when night time comes one can see the flames light on the screen at the top. It is almost 10" in height.
Thanks again all,
Wayne
The Sawdust burner is an old Icon for the sawmills in the time period of the sawmills modeled. The actual sawmill at Sebastopol has one, but no longer in use.
Inside of the burner of the mill
Satellite of the Mill 5/24
To get the sawdust from the mill to the burner takes some inventive ways. The "powerful" blower installed under the floor at the mill, combined with the big blower on the burner will move the sawdust thru the aluminum pipe very well.
For this model, the pipe is removable to be able to remove the roof of the sawmill.
As you can see the burner is scratchbuilt from brass rod, sheet, and screen. The blower is built with Plastistruct. It is lit inside so when night time comes one can see the flames light on the screen at the top. It is almost 10" in height.
Thanks again all,
Wayne
Comments